metal manufacturer Archives | ABC Metal Roofing

Mixing Metal Panels into Building Designs

Posted on October 24, 2019May 31, 2023 by Tyler Roose

One major benefit of building with metal is its unparalleled versatility. In addition to its durability and longevity, mixing metal panels into building designs can update the appearance of any structure. Available in a variety of textures, shapes, finishes and colors, the design possibilities and flexibility afforded to designers, architects, contractors and homeowners are endless. These panels are a durable option which offers a lengthier life span than several other materials.

Mixing Metal Panels with Traditional Materials

To add contrast and texture metal panels seamlessly pair with traditional building materials like shingles, wood shake and siding, stone and others. Metal panels can be used to modernize the exterior of any structure. From residential buildings to restaurants, commercial buildings, car washes and shopping centers, there are several ways to integrate metal within the design of a building:

Mix metal roofing panels with brick, stone or wood for added durability:

Splash and Dash Car opted for vibrant metal roofing panels on their commercial car wash.

ABC metal panels were used in conjunction with stone on this residential property.

Add an eye-catching exterior accent wall to mix metal wall panels into your design.
Thinking about creating an attached porch or carport? Metal panels can easily integrate with shingles or other traditional roofing materials.

ABC metal panels were used for this residential porch addition.

When mixing metal panels with other building materials it’s important to hire an experienced contractor and refer to the specific product manuals for installation.

This will help ensure the transition from the original material to metal panels is seamless. In addition to correctly trimming the metal panels to prevent ice and snow dams, they can also help ensure trim pieces are flashed beneath the existing shingles, so you can easily replace your existing roof in the future, if necessary.

Mixing Metal Panels

Another option for creating contrast within the design of your metal building is to utilize different metal panel profiles. There’s no limit to the number of panels you can combine to bring your vision to life. Try one panel profile on your roof and add another wall panel for the siding. You can also mix and match panel colors to add character to the exterior of your building.

With this approach, you can enjoy the lengthy lifespan of metal building materials without sacrificing the aesthetic appeal you desire. Mix metal panels on buildings for any application including residential buildings such as homes, agricultural facilities and hobby shops, as well as commercial buildings like workshops, restaurants and auto repair shops.

Spring Acres Farm used varying panel colors to customize and add variance to their riding arena.

Metal Panel Manufacturer Support

Many metal panel manufacturers offer a metal roof and wall panel profiles to support a variety of unique building projects. These high-quality panels come in a variety of styles, colors and finishes to fit any design. Browse our panel profiles as well as our project gallery to explore different applications for each of our products.

In addition to delivering high-quality products, we pride ourselves in providing excellent customer service throughout the duration of your project. Contact an experienced ABC representative for more details on mixing metal panels into your customers’ project.

When to Call a Metal Panel Manufacturer: Part II

Posted on March 31, 2018May 31, 2023 by Ken Buchinger

In Part 1 of this series, the success of a metal roof or wall project can rest heavily on the installer’s ability to recognize issues. When that happens, calling the manufacturer is not just suggested, but imperative to ensure any potential problem is averted before it’s too late. In addition to issues like damage to the physical panel or problems with the fasteners discussed previously, let’s take a closer look at a few other common circumstances under which ABC recommends reaching out to the manufacturer:

Alignment and Substrate Issues

The installer is responsible for verifying the condition of the substrate and checking for proper alignment before attaching any sheeting materials. If the installer notices any issues like this (either before installation or once they begin laying panels), they should stop and address them immediately. This might include oil canning or other irregularities in panel appearance. The installer should investigate the source, and—if unable to identify and properly remedy the situation on their own—they should call to the manufacturer’s support team. They may be able to suggest ways to identify source of the problem—whether it be installation or manufacturing—and from there, make suggestions on how to best address the situation.

Accessories

Adding penetrative accessories such as snow guards or mechanical curbs to a roof or installing doors, windows or louvers to walls can impact the system, its weather-tightness and appearance. Oftentimes, accessory installers with little or no knowledge of metal sheeting systems come onto the job to perform accessory installation. In these cases, it’s wise to visit with manufacturer prior to installation of these accessories and to alert the non-metal panel installer of precautions the manufacturer suggests be taken.

The image at left represent several installation issues that could have been avoided by calling the metal manufacturer prior to installation. The piping used is not compatible with metal roofing and was not installed in such a way to prevent issues with roof performance, including leaking and water damage.

Manufacturer recommendations can vary based on the panel type and building slope, as well as on the accessory and fastener type, and installation location.

Another factor to consider when adding accessories to your metal building is that some material types can react negatively with the installed metal system and lead to damage as well as void manufacturers warranties. Since accessories can be make of many different types of material, any potential accessories should always be researched prior to installation to ensure the material type is compatible with your metal roof and/or wall system.

Panel Engagement

Panel systems are designed and engineered to attach and engage one another to ensure optimal performance. These specification are outlined in the manufacturer’s installation manuals and project drawings. If at any point the panel does not engage as depicted in the details, installation should be halted and reviewed to determine the cause. This can require a call to the manufacturer to help determine if the matter is site- and/or substrate-related or if it’s a manufacturing issue requiring replacement material.

Panel engagement issues that warrant ceasing installation and making a call to the manufacturer include:

laps are not nesting properly
clips are not engaging as they should
panel modularity can’t be controlled
panels aren’t “resting” on the substrate—causing excessive bowing and stress

Once the material is completely installed, it is much more difficult to determine the cause of a problem and is potentially more expensive to remedy. Additionally, in many cases, full installation constitutes acceptance of the product and the manufacturer’s hands could be tied or extremely limited in being able to assist in remedying after the fact.

By knowing when to be proactive with a call to the manufacturer, installers can mitigate many types of potential pitfalls. And if you’re just not sure, it’s best to call.

For more information on metal roof and wall products, visit us online or reach out to your local representative today!

When to Call a Metal Panel Manufacturer: Part 1

Posted on January 30, 2018May 31, 2023 by Ken Buchinger

Each metal building installation is unique and even the most experienced of installers can run into trouble on a job. Whether a panel isn’t engaging properly, it’s not meeting stated tolerances or fasteners are missing or not working, anyone who takes on the task of installing metal panels needs to know when to call a metal panel manufacturer for support, guidance and resources at any time to ensure the success of their project.

Manufacturer Resources:

While it’s not the manufacturer’s responsibility to guarantee their panels are installed correctly, reputable manufacturers should set installers up for success. They can do this by providing product resources and recommendations on how to alleviate or mitigate potential pitfalls, and by sharing tips on how to avoid common mistakes that other installers have made.

Product Installation Manuals and Construction Drawings: Before installation begins, the product installation manual and detailed construction drawings should be reviewed by the installer—especially if this is his or her first time working with the product. These resources contain all the product information needed as well as installation best practices. American Building Components makes product details and installation information available to metal panel dealers and distributors through shop.abcmetalroofing.com. If you’re a dealer or distributor, click here to learn more and sign up for an account!

Service Representatives: Some may prefer to speak to an expert directly, especially if already in the middle of an install. In these cases, installers can call their sales person or local field service/customer service representative to discuss and find solutions.

Installation techniques can vary based on the unique dimensions of the panel as well as on the actual building design. When an issue arises that is beyond an installer’s expertise, it’s in the best interest of everyone involved to call a metal panel manufacturer for input before permanent mistakes are made.

When to Call a Metal Panel Manufacturer

Examples of when American Building Components recommends that an installer immediately call a metal panel manufacturer are:

Product Damage: Building owners may not always be able to recognize material damage and understand how it can be detrimental. Therefore, installers should always evaluate all building materials before any installation begins. If—after review—damage is suspected, the building owner should take pictures of the damage and notify the manufacturer immediately. The manufacturer will advise if the issue is minor and installation can begin, or if the panels should not be installed. The last thing you want to do is install damaged panels and have to uninstall them and wait for new materials. The impact of removing and replacing panels like this will significantly increase cost and delay the construction schedule.

Fastener Issues: The type of fastener used depends on the material they will be fastening to (substrate). If the substrate differs from what’s stated in the project details, check with the manufacturer to verify that the provided fasteners can be used. If the screws aren’t engaging properly, or there any problems with the fastener type. The manufacturer can advise how to move forward based on the project details. In short, substituting fasteners with ones not supplied by the manufacturer is never recommended.

Remember: no problem is too small to call a metal panel manufacturer for advice! In part two of this series, we’ll share more situations when calling the manufacturer will save time, money and headache. For more information on metal roof and wall products, visit us online or reach out to your local representative today!