Tag: metal wall panels

How To Cut Metal Panels

Posted on by Tyler Roose

Even with an accurate materials list, cutting metal roof and wall panels on-site is often a necessary part of the installation process. To avoid damaging your metal panels, it’s important to use the correct tools and overall best practices. Learn more about how to cut metal panels.




Safety Precautions

Before cutting your metal panels, take appropriate safety precautions to avoid getting hurt. Use gloves to protect your hands from being cut by the sharp metal panel edges. If metal filings fall on the surface of your metal panel, try to blow them off instead of touching them with your hands. Put on safety goggles to protect your eyes from airborne metal filings.

Tools

To avoid damaging the panels or their coating, it’s important to use proper tools. Snips are generally recommended for trim work while shears and nibblers are used for the panels themselves. Some of the best tools to use include:


● Aviation Snips: Good choice for small cuts, including cuts near pipe penetrations.
● Electric Shears: Ideal for lengthier cuts along steel.
● Mechanical Shears: Add-on tool that fits into an impact or screw gun. Ideal for use on standing seam panels at hips and valleys.
● Nibblers: Also known as turbo shears, they’re ideal for cutting openings for windows and doors.

Skill saws can also be used if this is the only resource available. Be sure to use a blade that is specifically designed for metal panels. Turn the panel upside down so that the painted side is facing the ground to make sure filings don’t stick to the paint coating.

Avoid Using:
● Torches
● Cut-Off Saws
● Reciprocating Saws
● Hacksaws
● Grinders

These tools heat up the metal panel and can melt or damage the edge that was cut. They can also cause metal filings to go airborne, creating a safety hazard. If those metal filings stick to the panel’s painted coating, they can cause surface rust.



Cutting Metal Panels

Marking the Panels

Before cutting your panels, be sure to measure and mark the cuts you’re planning to make. To mark your panels, lay them down flat with the painted side down. Make sure the panel is stable by clipping the panel in with c-clamps.

Do not mark on the finished side of the panel to avoid marring the visible surface. Avoid using a pencil with graphite lead as this is a dissimilar metal and could cause your metal panel to corrode. Instead, use a chalk line or magic marker. Use a straightedge or combination square to draw a straight line.

Cutting Technique

Before making a cut, be sure to line up the snip blade with the marking. Keep the blade perpendicular to the metal sheet you’re cutting. Work slowly and make steady and consistent cuts for smoother lines. Keep your cuts short to avoid jagged edges. For quicker, straighter cuts, use nibblers or mechanical shears.



Improve Efficiency by Planning Ahead

Cutting metal panels and trim in the field is easily one of the most time-consuming parts of the installation process. To avoid extra cutting in the field, it’s important to create an accurate materials list upfront. To do this, plan out how your panels will cover the roof or wall areas. Make sure the coverage width and count of the panels ordered is sufficient to cover the area you are installing. Consider which side of the building you will start with and how the ends of the wall or roof will be finished. It is possible that you may be able to avoid splitting a panel lengthwise if you do proper calculations in advance. Additionally, some panels are only able to be installed in one direction. Next, review the standard trim details such as valleys, hips, and around doors and windows. Be sure you have appropriate panels to cover these areas as well, and order to the closest pre-cut length available.

If you have any additional questions about how to cut metal panels in the field, contact your local ABC Sales Representative.

Advances in Ordering Metal Building Products Online

Posted on by Shelby Shipman

You’ve heard it before: “Online is the way of the future!” but do online solutions really meet the demands of traditional building? In recent blog posts, we’ve outlined the general benefits of using an online ordering platform to order metal building products. These include the customized metal roof and wall panels and trim American Building Components (ABC) offers. Beyond basic ordering functionalities (which are must-haves for an effective tool), there are additional features that manufacturers can incorporate to save you time and help you effectively build your projects when ordering metal online.

Advances in Ordering Metal Online

Time-saving features that improve ordering metal online include:

  • Copying and Merging Online Carts: Sophisticated online ordering tools now feature the ability to copy previously-created quotes, quote templates and/or orders. Once copied and/or merged, you can then modify item attributes like color and gauge to suit your preferences. These tools can also feature the ability to merge all items from several sources into a single, combined cart.
  • Consolidated Carts: Some online ordering tools take care to consider not just the actual tool functionality, but the experience people have when using it. Part of this is ensuring users can quickly and easily view order details. Enhanced online ordering websites are attempting this by grouping like-products together—thus reducing the page length of quotes and orders. This minimizes the time needed to view quotes and orders, and enables you to easily see the most important details.
  • Changing Multiple Items at Once: Large quotes and orders often require that the same specifications apply across a series of different items. For example, you may want the same panels but in a different color, texture or thickness. Likewise, you may even want to remove entire product types (like panels or trim). Instead of modifying cart items one at a time, you can now change to several products at once.
  • Complete Building Assemblies: Ordering metal online helps make getting the products you need easier and faster. But what if you know what you want to build, but aren’t sure about which products you’ll need? Online ordering tools like ABC’s now provide a selection of “Building Assemblies” to help. This feature groups all products needed to complete a project into single, pre-defined bundles. Selecting an assembly bundle puts all products needed for that building type into your online cart with just a few clicks of your mouse. In addition to saving time and effort, these assemblies can include warranty protection if all other conditions are met. Note that it’s also possible to remove specific products (like fasteners, sealant, etc.) if you already have them.
  • Account Management Improvements: Controlling who can place orders has been a key benefit of many online ordering systems. Based on customer feedback, ABC has overhauled this part of our tool, making it much easier for your organization’s designated account administrator to add and modify users, as well as set access and spending limits and track user activity within the system. Overall, these seemingly basic improvements allow you to more effectively manage your business.
  • View All Quotes and Orders: Common to many e-commerce sites, only the user who creates the quotes and/or orders generated through their account can see them. However, because most organizations rely on several people collaborating to best service their customers, more sophisticated capabilities are required. New features allow your account administrator to grant multiple users access to view quotes and orders while controlling the level of detail shared. This allows your team access what they need to do their jobs while also protecting sensitive details at your discretion.

Industry-first features like these further support building contractors, project managers and suppliers in meeting the needs of their customers. ABC has recognized the value tools and features like these can provide. As more people begin ordering metal online, we aim to continue enacting improvements that positively impact the ABC ordering process.

To find out more about ordering metal online, including how to price, quote and place orders, visit us online or contact your local ABC representative  today. To be notified when we launch time-saving online ordering enhancements, stay tuned to our blog, email and social media posts.

DISTRIBUTORS: Shop online at shop.abcmetalroofing.com!

Ordering Custom Products Online

Posted on by Shelby Shipman

In a prior blog post, we introduced the capability of ordering metal roof and wall panels, trim and building components online using the American Building Components online ordering website. While most people are familiar with ordering products online from a list of standard offerings, there is another exciting aspect to these sites–you can use them to order custom trim and structural products too! That means you don’t need to call or meet a sales rep during business hours to place a custom order. Custom trim and structural products can be ordered online anytime it is convenient! Here’s how it works.

When Standard Isn’t Enough

Most companies with online ordering websites offer products in standard shapes and lengths. Recognizing that not every job is standard, the ABC online ordering website offers customers the ability to order custom trim and structural products online 24/7. Using the “Custom Trim” or “Custom Structural” product categories, you can select the trim or structural product you want. Once selected, you can customize the product by indicating all desired specifications using the provided menu options. These include steel thickness, color, stretch-out (material width before it’s bent), breaks needed in the trim, hems and other features.

Order ABC Custom Trim and Structural Products Online

Visualizing Custom Trim and Structural Products

Even with the ability to set custom specifications, sometimes visuals can help ensure products are manufactured correctly. To help, ABC takes product customization a step further than most. You can use the ABC online ordering tool to add your own custom hand-drawn or drafted drawings. These help show the complete layout of the product as a supplement to the specifications you select online.

You can easily upload and link already-prepared drawings to your ABC order in any common electronic file format. If drawings aren’t done, ABC’s online ordering website provides an easy-to-use template that walks you through how to create simple hand-drawn or digital drawings.

A Time-Saving Process

Once all of the customization information is input, simply check for accuracy and add the item(s) to your cart. Then, simple repeat for as many custom trim and structural products required. Additionally, you can save each custom item created with it’s own product name to quickly add them to future orders.

Online ordering tools that offer a quick and seamless way to include custom trim and structural products can save you time and help your business run more efficiently. The ability to customize products online makes it significantly easier to do business with the material supplier, particularly since most other online tools only offer standard products.

To find out more about how to quote, order and build custom and standard products online and to sign up for an online ordering account today, visit http://www.abcmetalroofing.com/shop/ or contact your local ABC representative. Stay tuned to be the first to know when we launch new time-saving enhancements. Upcoming features include the ability to:

  • copy and merge items from multiple quotes onto one,
  • edit multiple items at one time,
  • add entire product packages (assemblies) based on building specifications,
  • and more!

DISTRIBUTORS: Shop online at shop.abcmetalroofing.com!

Metal Panel Installation: Surface Considerations and Building Applications

Posted on by Ken Buchinger

In our last blog post, we outlined the steps to take before metal panel installation to ensure projects are built to last. In this post, we’ll take a look at the important metal panel installation considerations that should be made, particularly when working with varying surface conditions and building end-uses.

Surface Considerations:

During the installation of metal panels, it is critical that installers:

  • make sure everything is square and on a level plane (i.e., plumb and true). If it’s not, it will need to be corrected. Note: It is not recommended that the building owner do this themselves unless they are experienced and comfortable assuming the associated risks.
  • ensure the integrity of the substrate is not compromised. If installation issues or delays are caused by faulty substrate, for example, the parties responsible for the substrate would need to correct the causal issue. In retrofit projects, existing substrate issues must be addressed, but it is likely that the original builder will not be able to be sourced to correct the problem. In this case, a roofing consultant or knowledgeable substrate tradesman can help advise.
Installing Metal Panels with Different Building Applications

While installation is generally the same for most end-use applications, some equipment may vary. Depending on the other products or materials in the mix, there are certain caveats to keep in mind. For instance:

  • Over Asphalt Shingles: While installing a metal roof over an existing asphalt shingle roof is possible, it is not recommended to place metal panels directly over asphalt. In this scenario, keep in mind that:
    • It’s best to remove asphalt shingles or use a furring strip to create a buffer. (This means you can use a 1” x 4” piece of wood to provide clearance between the asphalt shingles and the metal panels.)
    • It’s not ideal to lay underlayment on top of asphalt and then install a metal roof because the shingle will curl and those imperfections will show through the metal, particularly when using lighter gauge.
  • Over Dissimilar Metals: Do not let your metal panels come into contact with dissimilar metals or allow run-off water that has been in contact with dissimilar metals to come into contact with the metal panels.
  • Over Treated Lumber: Separator material can be recommended by your installer or preferred material provider (lumber yard, home improvement store, etc.) and should be used; appropriate fasteners designed to be used to connect treated lumber with metal panels should always be used in these cases as well.
Other Metal Panel Installation Considerations:

The need for the following features and considerations can vary based on projects.

  • Vapor barriers
  • Ice and water shields
  • Regardless of all else, you’ll always want to be sure local codes/Homeowners Association (HOA) requirements are met.
Final FAQ:

How to choose a Metal Panel installer? End-users can request a list of nearby installers who may be able to help with their project from their metal building material supplier. Material manufacturers do not make these recommendations.

What if your panels are installed incorrectly? Let the installer know about any issues as soon as possible and work to get them resolved quickly. If you think the improper installation jeopardizes the product warranty, please advise the company that sold the material to you (metal panel distributor) as soon as possible. They will work with the manufacturer to resolve any warranty issues.

For more information on metal panel installation considerations or to find a metal panel distributor or installer in your area, contact your local ABC representative.

 

Preparing for Installation of Your Metal Panels

Posted on by Tyler Roose

There is no doubt that selecting metal roof and wall products is a wise investment. To make the most of that investment, it’s important to take certain preparation steps before beginning your metal panel installation. Once you’ve purchased the materials you need, the next order of business is to ensure the metal panels, trim and components are properly prepped. This is your best chance at keeping your job site safe, making sure your materials are not lost or damaged and ensuring your project stays on schedule so you reap the benefits of going metal.

 

 

 

 

 

 

  • Step One: Project Planning

    Starting your project with a clear plan will yield the best results. When planning your metal panel installation project, choosing an appropriate time to install is essential. Considerations will vary based on your location and include:

    • Moisture levels: it’s better to install when it’s dry (no rain, dew, snow or ice) as installing when surfaces are slick increases chances of slipping and injury.
    • Wind conditions: it’s better to install in low-wind conditions to prevent chances of injury/product damage.

  • Step Two: Material Check

    Once your materials are delivered to your warehouse or job site, the next order of business is to make sure you’ve received all of the building materials you ordered and that all pieces are in good condition. You will need to:

    • Manage a material receiving checklist
    • Check your panels for moisture, denting/bending, wind damage and additional transit abrasion
    • Ensure proper storage of your materials, including panels and trim in bundled and stacked sheets, to protect them from damage and prevent corrosion and/or galvanic reaction

    Check out ABC’s blog post on metal panel delivery and material handling for details on proper loading and unloading, cutting and job site safety. Additionally, our post on metal panel storage provides best practices on keeping your panels and components in pristine condition whether they’re going to be installed immediately or stored for future use or sale.

  • Step Three: Metal Panel Installation Preparation

    Once the location of the project is defined and the materials have been ordered, delivered and checked, the ultimate responsibility for on-site panel preparation lies with the installer, who should:

    • Re-check that all materials are present and in good condition
    • Arrange the material so that it stays undamaged and doesn’t pose a hazard to anyone on the site during installation
    • Ensure all metal panel installation tools are available and properly functioning, including drills, ladders and seamers
    • Make sure all safety preparations have been made and all safety gear is in good condition, including gloves, eye masks, safety helmets, boots and wrist guards.

Metal building panel and components manufacturers often make a variety of resources available for review, including product details, technical bulletins and installation manuals that can help building owners, distributors/contractors and installers alike. For more information on preparing for metal panel installation, contact your local ABC representative.